KNX RF Control
Σε ανακαινίσεις όπου η καλωδίωση είναι περασμένη μπορούμε να έχουμε RF ασύρματες συσκευές & να μπορέσουμε να κάνουμε σχεδόν τα πάντα.
Pos.1 KNX RF+ Line Coupler.
The MDT KNX RF+ Line Coupler connects MDT KNX RF+ devices to the KNX bus. Offers extensive filter functions to reduce the KNX RF+ bus load.
RF-LK001.03 
KNX RF+ Line Coupler, Flush mounted, commissioning with ETS5
- For operating inside the EU, 868 MHz.
- KNX RF+ line coupler to connect MDT KNX RF+ devices like MDT Push Button RF+ or MDT Glass Push Button RF+
- New KNX RF+ protocol in system mode. Commissioning with ETS5/6.
- Segment coupler functionality (ETS6).
- Compatible to the new KNX RF+ specification.
- Filter functions to reduce bus load.
- Flush mounted in an Installation box. (WxHxD): 41x41x22mm
- Integrated bus coupling unit.
Pos.2 KNX RF+ Push Buttons Plus.
The MDT KNX Push-button Plus releases KNX telegrams after pushing the buttons on top.
KNX RF+ Push Button.
White matt, with Actuator.
RF-TA55A2.01 (2-fold)
RF-TA55A4.01 (4-fold)
RF-TA55A6.01 (6-fold)
RF-TA55A8.01 (8-fold)
KNX RF+ Push Button.
Black matt, with Actuator.
RF-TA55A206.01 (2-fold)
RF-TA55A406.01 (4-fold)
RF-TA55A606.01 (6-fold)
RF-TA55A806.01 (8-fold)
Fits into Frames System55: GIRA Standard 55, E2, E22, Event, Esprit | BERKER S1, B3, B7 | JUNG A 500, A PLUS, A CREATION, AS 500, A550, A FLOW | MERTEN 1M, M-Smart, M-Plan, M-Pure
- KNX RF+ protocol in system mode
- Commissioning with ETS 5 or higher
- For operation inside the EU, 868 MHz
- Fits 55 mm systems.
- Push Buttons can be programmed for 1 or 2 button operation.
- NO or NC contact operation, operational time of push button adjustable.
- Forced setting function for each output.
- Operation with short / long button push and 2 objects.
- 2 integrated logical modules.
- Operation of blinds and shutters, 1 and 2 button operation.
- 2-fold switching actuator or 1-fold shutter actuator (RF-TA55xA.01)
- Connection via MDT KNX RF+ Line Coupler.
- Centered text area for individual description.
- To replace conventional push-buttons.
- To upgrade you installation without installing KNX bus cables.
- Power supply 230VAC. Integrated bus coupling unit.
Pos.3 KNX RF+ Glass Push-button Plus.
The MDT KNX RF+ Glas Push-button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
RF-GTT4W.01 Glass Push Button 4-fold, with Actuator, White, Orientation Light, +Temp Sensor
RF-GTT4S.01 Glass Push Button 4-fold, with Actuator, Black, Orientation Light, +Temp Sensor
RF-GTT8W.01 Glass Push Button 8-fold, with Actuator, White, Orientation Light, +Temp Sensor
RF-GTT8S.01 Glass Push Button 8-fold, with Actuator, Black, Orientation Light, +Temp Sensor
- KNX RF+ protocol in system mode. Commissioning with ETS5 or higher.
- With temperature sensor to measure room temperature.
- Sensor areas can be programmed for 1 or 2 button operation.
- NO or NC contact operation, operational time of push-button adjustable.
- Forced setting function for each output.
- Operation with short / long button push and 2 objects.
- Operation of blinds and shutters, 1 and 2 button operation.
- Can be set as 2-fold switching actuator or 1-fold shutter actuator (ver with 4 buttons).
- Can be set as 4-fold switching actuator or 2-fold shutter actuator (ver with 8 buttons).
- 4 integrated logical functions, cleaning function.
- Additional switching channel (e.g. panic function).
- Connection via KNX RF+ Line Coupler.
- Surrounding orientation light with day / night object.
- Labelling foil to be inserted behind the glass front.
- To replace conventional push buttons.
- To upgrade your installation without installing KNX bus cables.
- Power supply 230VAC. 4-fold 92x92mm / 8-fold 92x163mm
- Integrated bus coupling unit.
Pos.4 KNX RF+ Switch Actuator.
The MDT KNX RF+ Switch Actuator receives KNX / EIB telegrams ans switchs up to 2 indipendent electrical loads. Each output uses a monostable relay.
RF-AKK1UP.01 KNX RF+ Switch Actuator 1-fold, Flush, 230VAC, 10A
RF-AKK2UP.01 KNX RF+ Switch Actuator 2-fold, Flush, 230VAC, 10A
- KNX RF+ protocol in system mode. Commissioning with ETS5 or higher.
- KNX RF+ protocol in system mode.
- Commissioning with ETS 5 or higher.
- For operation inside the EU, 868 MHz.
- NO and NC contact operation.
- Time functions (switch-on/switch-off delay, staircase light function).
- Status response (active/passive) for each channel.
- Logical linking of binary data. 8 scenes per channel.
- Central switching functions and block functions.
- Flush mounted in an installation box.
- Connection via MDT KNX RF+ Line Coupler.
- Power supply 230VAC. (WxHxD): 41x41x22mm
- Integrated bus coupling unit.
Pos.5 KNX RF+ Shutter Actuator.
The MDT KNX RF+ Shutter Actuator receives KNX / EIB telegrams and controls 1 shutter. The output uses two monostable relays
RF-JAL1UP.01 KNX RF+ Shutter Actuator 1-fold, Flush, 230VAC, 10A
- KNX RF+ protocol in system mode.
- Commissioning with ETS 5 or higher.
- For operation inside the EU, 868 MHz.
- Operation mode blind / shutter adjustable.
- Travel-, pause (on change of direction) and step time adjustable.
- 1 Bit automatic function and sun protection.
- 8 Bit positioning for shutter and blinds.
- 8 scenes. Alarm-, central- and block functions.
- Connection via MDT KNX RF+ Line Coupler.
- Flush mounted in an installation box (WxHxD): 41x41x22mm
- Power supply 230VAC. Integrated bus coupling unit
Pos.6 KNX RF+ Universal Interface.
The MDT Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
RF-BE2230.01 KNX RF+ Universal Interface, 2-fold, Flush, for 230VAC signals
- KNX RF+ protocol in system mode.
- Commissioning with ETS 5 or higher.
- For operation inside the EU, 868 MHz.
- To connect 230 V push-buttons, switches, presence detectors.
- 4 integrated logic modules, e.g. evaluation of the inputs (e.g. window closed or sending second object).
- NO or NC contact operation, operational time of push-button adjustable.
- Operation of blinds and shutters, 1 and 2 button operation.
- Forced setting function for each output.
- Operation with short/long button push and 2 objects.
- Counting of pulses. Cyclical sending of contact state programmable.
- To upgrade your installation without installing KNX bus cables.
- Flush mounted in an installation box, (WxHxD): 41x41x22mm.
- Power supply 230VAC. Integrated bus coupling unit.
Pos.7 KNX RF+ Socket.
The MDT KNX RF+ Socket receives KNX / EIB telegrams and switches one electrical load.
RF-AKK1ST.01 KNX RF+ Socket, 230VAC, 16A
RF-AZK1ST.01 KNX RF+ Socket, 230VAC, 16A, with active power measurement.
- KNX RF+ protocol in system mode.
- Commissioning with ETS 5 or higher.
- For operation inside the EU, 868 MHz.
- NO and NC contact operation.
- Time functions (switch-on/switch-off delay, staircase light function).
- Status response (active/passive) for each channel.
- Logical linking of binary data.
- 8 scenes per channel.
- Central switching functions and block functions.